Previous Next

TEBA0841|Carrier Boards for 4 x 5

TEBA0841-TEBA0841 - Simple base for TE0841 and TE0741

The Trenz Electronic TEBA0841 is a low cost carrier board for testing, evaluation and development purposes of TE0841 and TE0741 FPGA modules. Although this base-board is dedicated to the modules TE0841 and TE0741, it is also compatible with other Trenz Electronic 4 x 5 cm SoMs. The carrier board offers one SFP connector, one Micro USB2 B connector, two 2 x 25-pin headers and one XMOD header to get access to the I/O's and interfaces of FPGA modules. To test and evaluate the Multi-Gigabit transceiver units of the FPGA module, 6 MGT lanes on the carrier board are routed in a loop-back circuit on the B2B connectors.

Key Features

  • 3 x Trenz Electronic 4 x 5 module B2B connectors (Samtec LSHM series)
  • SFP+ connector (enhanced small form-factor pluggable), supports data transmission rates up to 10 Gbit/s
  • Micro USB2 type B connector
  • 4 x 5 SoM programmable by XMOD header
  • Soldering-pads for pin headers for access to SoM's I/O-bank pins, usable as LVDS-pairs
  • Soldering-pads for pin headers for access to further interfaces and I/O's of the SoM
  • 2 x user LEDs routed to I/O-pins of the SoM
  • 4-bit DIP switch for setting module parameters
  • 4 x VCCIO selection jumper to set module's bank voltages

Scope of Delivery

  • 1 x TEBA0841-02 Trenz Electronic carrier board for TE0841, TE0741 and compatible modules
  • 1 x TE0790-03 XMOD FTDI JTAG Adapter - Xilinx compatible (pre-assembled)
    This adapter is not suitable for the supply of basic board + module; a power supply has to be attached seperately.
  • 2 x Pin Header, straight, double row, 50 pins
  • 4 x Jumper
20171115 04

產品編號:TEBA0841-02

ShopeeDB 100.118 PNG  線上商店: 購買連結 可線上刷卡/享運費補助!

和澄科技 Haley Technology

電話 │ 886-3-5790380
傳真 │ 886-3-5790370
信箱 │ sales@haleytech.com
地址 │ 新竹市關新路27號18樓之2

               

 

 

M有任何問題嗎? Line 我們最快! 

產品搜尋