Previous Next

TE0790| XMOD FTDI JTAG Adapter| not compatible with Xilinx Tools

TE0790-XMOD FTDI JTAG Adapter - not compatible with Xilinx Tools

XMOD-USB-X is a universal USB adapter with 2 channels based on FTDI FT2232H USB2 HS Interface chip. In the consigned default configuration port A is JTAG and port B is a serial interface.

FT2232H port A and B are connected to small on-board programmable CPLD to allow flexible application specific remappings of FT2232H functions into 8 user I/O pins of single Xmod 12 x 8 module.

Minimum PCB area on base board to support JTAG function: 5 x 10 mm (does not include mounting hole space).

NOTE: This adapter is not compatible with Xilinx tools, and can be used independently.

 2022 11 17 141707

Key Features

  • XMOD form-factor
    - Supported base slots: 6 x 2, 8 x 4, 10 x 6, 12 x 8, 5 x 2, 5 x 3
    - Size: 20 x 25 mm
    - M3 mounting hole
  • FT2232H
    - Channel B RX/TX LED's (on top, not visible from front)
    - Mini USB connector (more rigid then micro USB)
    - 93C56 EEPROM
  • Lattice XO2-256 CPLD
    - On-board programmable using Lattice tools
    - 8 universal I/O pins
    - VCCIO either 3.3 V or user supplied (1.8 V to 3.3 V)
    - Red user LED (front visible)
    - 12 MHz clock from on-board Oscillator
  • Step down DC/DC Converter for optional power supply via USB-Power
  • Green Power-on LED (front visible)
  • User button (front accessible)
  • 4 position DIP switch
    - Choose CPLD program mode
    - FTDI EEPROM disable (not implemented in PCB REV 1)
    - Use VIO same as VCC
    - Use VCC from USB

Scope of Delivery

  • 1 x TE0790-03L with soldered header (USB cable not included with delivery)
20171115 04

產品編號:TE0790-03L

ShopeeDB 100.118 PNG  線上商店: 購買連結 可線上刷卡/享運費補助!

和澄科技 Haley Technology

電話 │ 886-3-5790380
傳真 │ 886-3-5790370
信箱 │ sales@haleytech.com
地址 │ 新竹市關新路27號18樓之2

               

 

 

M有任何問題嗎? Line 我們最快! 

產品搜尋