Adapter/Programmer

Previous Next

TE0790－XMOD FTDI JTAG Adapter - not compatible with Xilinx Tools

XMOD-USB-X is a universal USB adapter with 2 channels based on FTDI FT2232H USB2 HS Interface chip. In the consigned default configuration port A is JTAG and port B is a serial interface.

FT2232H port A and B are connected to small on-board programmable CPLD to allow flexible application specific remappings of FT2232H functions into 8 user I/O pins of single Xmod 12 x 8 module.

Minimum PCB area on base board to support JTAG function: 5 x 10 mm (does not include mounting hole space).

NOTE: This adapter is not compatible with Xilinx tools, and can be used independently.

Key Features

• XMOD form-factor
  - Supported base slots: 6 x 2, 8 x 4, 10 x 6, 12 x 8, 5 x 2, 5 x 3
  - Size: 20 x 25 mm
  - M3 mounting hole
• FT2232H
  - Channel B RX/TX LED's (on top, not visible from front)
  - Mini USB connector (more rigid then micro USB)
  - 93C56 EEPROM
• Lattice XO2-256 CPLD
  - On-board programmable using Lattice tools
  - 8 universal I/O pins
  - VCCIO either 3.3 V or user supplied (1.8 V to 3.3 V)
  - Red user LED (front visible)
  - 12 MHz clock from on-board Oscillator
• Step down DC/DC Converter for optional power supply via USB-Power
• Green Power-on LED (front visible)
• User button (front accessible)
• 4 position DIP switch
  - Choose CPLD program mode
  - FTDI EEPROM disable (not implemented in PCB REV 1)
  - Use VIO same as VCC
  - Use VCC from USB

Scope of Delivery

• 1 x TE0790-03L with soldered header (USB cable not included with delivery)

	產品編號：TE0790-03L
	線上商店： 購買連結 可線上刷卡/享運費補助！

Previous Next

TEI0005－FPGA USB-Programmer2 SMD Module

FPGA USB-Programmer2 SMD module is a FT2232H based JTAG programmer supported by Intel Quartus. It's designed as surface-mount module and have to be fitted on the target board in Surface Mount Technology. Furthermore, there is also an UART interface available and two I/O-pins reserved for future use.

Features

• Supported by Intel Quartus (JTAG Mode only)
• Designed as Surface-mount module
• Compatible to SMT Pick and Place Assembly Process
• Delivery Option in Standard JEDEC Tray
• Dimension: 17 x 17 mm
• Based on FTDI FT2232H USB2 Interface
• Additional UART channel available
• Activity LEDs
• Can be used within industrial temperature range

Scope of Delivery

• 1 x TEI0005-02 FPGA USB-Programmer2 SMD module

	產品編號：TEI0005-02
	線上商店： 購買連結 可線上刷卡/享運費補助！

Previous Next

TEI0004－FPGA USB-Programmer2 JTAG (Arrow) for development with Intel FPGAs

This article is the replacement for the TEI0004-01.

• Features

  • Supported by Intel Quartus (JTAG mode only)
  • Based on FTDI FT2232H USB2 Interface
  • JTAG connector: standard 2 x 5 pin header
  • 2.54 mm header
  • Intel JTAG Compatible Pinout
  • USB: MicroUSB connector, USB 2.0 HS support
  • Voltage levels supported: 1.8 to 3.3 V
  • Very small size: 13.5 x 22 mm
  • Additional UART Channel available
  • RED activity LED
  • GREEN Power-on LED

Scope of Delivery

• 1 x TEI0004-02 FPGA USB-Programmer2 JTAG (Arrow)

	產品編號：TEI0004-02
	線上商店： 購買連結 可線上刷卡/享運費補助！