TE0790－XMOD FTDI JTAG Adapter - Xilinx compatible
XMOD-USB-X is a universal USB adapter with 2 channels based on FTDI FT2232H USB2 HS Interface chip. In the consigned default configuration Port A is JTAG and Port B is a serial interface.
FT2232H port A and B are connected to small on-board programmable CPLD to allow flexible application specific remappings of FT2232H functions into 8 user I/O pins of single XMOD 12 x 8 Module.
Minimum PCB area on base board to support JTAG function: 5 x 10 mm (does not include mounting hole space).
Key Features
- XMOD form-factor
- Supported base slots: 6 x 2, 8 x 4, 10 x 6, 12 x 8, 5 x 2, 5 x 3
- Size: 20 x 25 mm
- M3 mounting hole - FT2232H
- Channel B RX/TX LED's (on top, not visible from front)
- Mini USB connector (more rigid then micro USB)
- 93C56 EEPROM - Lattice XO2-256 CPLD
- On-board programmable using Lattice tools
- 8 universal I/O pins
- VCCIO either 3.3 V or user supplied (1.8V to 3.3V)
- Red user LED (front visible)
- 12 MHz clock from on-board Oscillator - Step down DC DC Converter for optional power supply via USB-Power
- Green Power-on LED (front visible)
- User button (front accessible)
- 4 position DIP switch
- Choose CPLD program mode
- FTDI EEPROM disable (not implemented in PCB REV 1)
- Use VIO same as VCC
- Use VCC from USB
Scope of Delivery
- 1 x TE0790-03 with soldered header (USB cable not included with delivery)
 |
產品編號：TE0790-03 |
 |
線上商店： 購買連結 可線上刷卡/享運費補助！ |
