TE0713-FPGA Module with Xilinx Artix-7 100T-2C, 1 GByte DDR3L, 4 x 5 cm
The Trenz Electronic TE0713-02-72C46-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 100T FPGA, USB 3.0 to FIFO bridge, 1 GByte DDR3L SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/O's are provided via rugged high-speed strips.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.
Key Features
- Xilinx Artix-7 XC7A100T-2FGG484C
- Rugged for high shock and high vibration resistance
- Industrial temperature range on request
- Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
- 1 GByte DDR3L 32-bit SDRAM
- 32 MByte QSPI Flash memory (with XiP support)
- USB 3.0 to FIFO interface bridge
- 152 FPGA I/O's (75 differential pairs) available via B2B connectors
- Programmable clock quad generator
- GTP transceiver clock (default 125 MHz)
- Fabric clock (default 200 MHz)
- External clock input for GTP transceivers via B2B connector
- 4 GTP (multi Gigabit transceiver) lanes
- On-board high-efficiency DC-DC converters
- System management and power sequencing
- eFUSE bit-stream encryption
- AES bit-stream encryption
- User configurable LED
- Evenly-spread supply pins for good signal integrity
Scope of Delivery
- 1 x TE0713-02-72C46-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 100T
- 8 x screws
- 4 x bolts
 |
產品編號： TE0713-02-72C46-A：Xilinx Artix-7 100T-2C TE0713-02-82C46-A：Xilinx Artix-7 200T-2C |
 |
線上商店： 購買連結 可線上刷卡/享運費補助！ |
