TE0711 Xilinx Artix-7:35T｜High IO Xilinx Artix-7 35T Module with speedgrade 2C and USB
The Trenz Electronic TE0711-01-35-2C is a FPGA module integrating a Xilinx Artix-7 35T, 32 MByte Quad SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.
-
Key Features
- Xilinx Artix-7 XC7A35T-2CSG324C
- Rugged for shock and high vibration
- 32 MByte QSPI Flash memory
- 100 MHz MEMS oscillator
- Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
- 178 FPGA I/O's (84 differential pairs) available on board-to-board connectors
- On-board high-efficiency DC-DC converters
- 4.0 A x 1.0 V power rail
- 1.0 A x 1.8 V power rail
- 1.0 A x 1.5 V power rail
- System management and power sequencing
- eFUSE bit-stream encryption
- AES bit-stream encryption
- Four LEDs (three freely used by user design, one system controller CPLD status LED)
- FTDI FT2232H USB 2.0 High Speed to UART/FIFO
- Evenly-spread supply pins for good signal integrity
Scope of Delivery
- 1 x TE0711-01-35-2C Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 35T
- 8 x screws
- 4 x bolts
 |
產品編號： TE0711-01-35-2C：High IO Xilinx Artix-7 35T TE0711-01-100-2C：High IO Xilinx Artix-7 100T |
 |
線上商店： 購買連結 可線上刷卡/享運費補助！ |
