TE0711｜High IO Industrial-grade Xilinx Artix-7 35T Module with speedgrade 2I and USB

The Trenz Electronic TE0711-01-35-2I is an industrial-grade FPGA module integrating a Xilinx Artix-7 35T, 32 MByte Quad SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A35T-2CSG324I,
• Rugged for shock and high vibration
• 32 MByte QSPI Flash memory
• 100 MHz MEMS oscillator
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 178 FPGA I/O's (84 differential pairs) available on board-to-board connectors
• On-board high-efficiency DC-DC converters
  • 4.0 A x 1.0 V power rail
  • 1.0 A x 1.8 V power rail
  • 1.0 A x 1.5 V power rail
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Four LEDs (three  freely used by user design, one system controller CPLD status LED)
• FTDI FT2232H USB 2.0 High Speed to UART/FIFO
• Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0711-01-35-2I Trenz Electronic 4 x 5 cm  FPGA module with Xilinx Artix-7 35T
• 8 x screws
• 4 x bolts

TE0714 Xilinx Artix-7：35T｜FPGA Module with Xilinx Artix-7 XC7A35T-2CSG325I, 3,3V Configuration, 4 x 3 cm 

The Trenz Electronic TE0714-03-35-2I is an industrial-grade FPGA module integrating a Xilinx Artix-7 35T, 16 MByte QSPI Flash memory for configuration and operation and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

Key Features

• Xilinx Artix-7 XC7A35T-2CSG325I
• Rugged for high shock and vibration
• Size: 3 x 4 cm
• 16 MByte QSPI Flash memory
• Differential MEMS oscillator for MGT clocking
• MEMS oscillator for PL clocks (optional)
• Plug-on module with 2 × 100-pin high-speed hermaphroditic strips
  
  • 138 FPGA I/O's (max 68 differential) +5 I/O's (QSPI or user I/O's)
  • XADC Analog Input
  • 4 GTP (high-performance transceiver) lanes
  • GT reference clock inputs
  • Optimized I/O and power pins for good signal integrity
• On-board high-efficiency DC-DC converters
• Power supply for all on-board components
• eFUSE bit-stream encryption (AES)
• One user configurable LED

Scope of Delivery

• 1 x  TE0714-03-35-2I Trenz Electronic FPGA module with Xilinx Artix-7 35T

TE0710 Xilinx Artix-7:35T｜Dual fast Ethernet Artix Module with Xilinx Artix-7 100T Speedgrade 2C

The Trenz Electronic TE0710-02-35-2CF is a FPGA module integrating a Xilinx Artix-7 35T FPGA, two 10/100 Mbit Ethernet PHYs, 512 MByte DDR3 SDRAM with 8-bit width, 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

• Key Features

  • Xilinx Artix-7 XC7A35T-2CSG324C
  • Rugged for shock and high vibration
  • 32 MByte (256 Mbit) Quad-SPI Flash memory
  • 100 MHz MEMS oscillator
  • 512 MByte DDR3 Memory
  • Dual 100 Mbit Ethernet Phy
    • MAC Address EEPROM
  • On-board high-efficiency DC-DC converters 
    • Core voltage regulator: 4 A

    • 4.0 A x 1.0 V power rail

    • 1.0 A x 1.8 V power rail

    • 1.0 A x 1.5 V power rail

  • Power supply: either 3.3 V or 3.3 V and 5 V
  • Plug-on module with 2 x 100-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
  • Up to 112 (51 differential pairs + 10 single-ended) single-ended FPGA I/O pins available on B2B strips
  • 3 LEDs (two status LEDs and one user LED)
  • System management and power sequencing
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Evenly spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0710-02-35-2CF Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 35T
• 8 x screws
• 4 x bolts

TE0727 Xilinx Zynq-7000｜ZynqBerryZero Module with Xilinx Zynq-7010, 512 MB DDR3L SDRAM, 3 x 6.5 cm

The ZynqBerryZero is a SoC module with integrated Xilinx Zynq-7010 FPGA and the form factor of the Raspberry Pi Zero. Furthermore, the 3 x 6.5 cm small board is equipped with 512 MByte DDR3L SDRAM, 16 MByte Flash and various connectors, such as two microUSB connectors, a micro SD card slot, a mini HDMI and a CSI-2 connector (camera).

• Key Features

  • Xilinx Zynq XC7Z010-1CLG225C FPGA
  • Raspberry Pi Zero form factor
  • 512 MByte DDR3L SDRAM
  • 16 MByte Flash memory
  • 40 pin HAT header
  • Total I/O: 26 GPIO
  • 1 x micro USB for JTAG/UART
  • 1 x micro USB 2.0
  • Micro SD card slot
  • Mini HDMI connector, type C
  • CSI-2 connector (camera)

Scope of Delivery

• 1 x TE0727-02-41C34 "ZynqBerryZero" Trenz Electronic FPGA module with Xilinx Zynq-7010 FPGA