TE0715－SoC Module with Xilinx Zynq Z-7012S single core, 1 GByte DDR3L SDRAM, 4 x 5 cm

The Trenz Electronic TE0715-05-21C33-A is a SoC module integrating a Xilinx Zynq Z-7012S with 4 MGT Links, a Gigabit Ethernet transceiver (physical layer), 1 GByte DDR3L SDRAM, 32 MByte SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

This device contains a single-core ARM Cortex-A9 processor and represents the lowest cost entry point to the scalable Zynq-7000 platform.

Key Features

• Xilinx Zynq XC7Z012S-1CLG485C
• Rugged for shock and high vibration
• Single-Core ARM Cortex-A9 MPCore up to 766MHz
• 10/100/1000 tri-speed gigabit Ethernet transceiver (PHY) with SGMII
• MAC Address EEPROM
• USB 2.0 high-speed ULPI transceiver
• 1 GByte (32-bit) DDR3L SDRAM
• 32 MByte QSPI Flash memory (with XiP support)
• Programmable Clock Generator: Transceiver Clock (default 125 MHz)
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 132 FPGA I/O's (65 LVDS pairs possible) and 14 PS-MIO available on board-to-board connectors
• 4 GTP/GTX Tranceivers
• On-board high-efficiency DC-DC converters
  • 4.0 A x 1.0V power rail
  • 3.0 A x 1.5V power rail
• Temperature compensated RTC (real-time clock)
• System management
• eFUSE bit-stream encryption
• AES bit-stream encryption
• User LED
• Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0715-05-21C33-A Trenz Electronic 4 x 5 cm SoC module with Xilinx Zynq Z-7012S (single core processor)
• 8 x screws
• 4 x bolts

TE0712-FPGA Module with Xilinx Artix-7 XC7A200T-2FBG484I, 1 GByte DDR3, 4 x 5 cm

The Trenz Electronic TE0712-03-82I36-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 200T FPGA, 1 GByte of DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, a 10/100 Mbit Ethernet transceiver, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A200T-2FBG484I
• Rugged for high shock resistance and high vibration
• 32 MByte (256 Mbit) Quad-SPI Flash memory
• 4 GTP (high-performance transceiver) lanes
  • GTP (high-performance transceiver) clock input
• 1 GByte (32-bit) DDR3 SDRAM
• 10/100 Mbit Ethernet PHY in RMII Mode
  • MAC address EEPROM
• Programmable Low Jitter PLL (Silicon Labs Si5338)
• On-board high-efficiency DC-DC converters
  • 12 A x 1.0V power rail
  • 1.5 A x 1.8V power rail
  • 1.5 A x 1.5V power rail
• Supply voltages: either 3.3V or 3.3V and 5V
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 158 FPGA I/O's (78 differential pairs) available on board-to-board connectors
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Two User configurable LEDs
• Evenly spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0712-02-82I36-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 200T
• 8 x screws
• 4 x bolts

TE0713-FPGA Module with Xilinx Artix-7 100T-2C, 1 GByte DDR3L, 4 x 5 cm

The Trenz Electronic TE0713-02-72C46-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 100T FPGA, USB 3.0 to FIFO bridge, 1 GByte DDR3L SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/O's are provided via rugged high-speed strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A100T-2FGG484C
• Rugged for high shock and high vibration resistance
• Industrial temperature range on request
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 1 GByte DDR3L 32-bit SDRAM
• 32 MByte QSPI Flash memory (with XiP support)
• USB 3.0 to FIFO interface bridge
• 152 FPGA I/O's (75 differential pairs) available via B2B connectors
• Programmable clock quad generator
  • GTP transceiver clock (default 125 MHz)
  • Fabric clock (default 200 MHz)
• External clock input for GTP transceivers via B2B connector
• 4 GTP (multi Gigabit transceiver) lanes
• On-board high-efficiency DC-DC converters
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• User configurable LED
• Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0713-02-72C46-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 100T
• 8 x screws
• 4 x bolts

TE0712-FPGA Module with Xilinx Artix-7 XC7A35T-2FGG484I, 1 GByte DDR3, 4 x 5 cm

The Trenz Electronic TE0712-02-42I36-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 35T FPGA, 1 GByte of DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, a 10/100 Mbit Ethernet transceiver, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A35T-2FGG484I
• Rugged for high shock resistance and high vibration
• 32 MByte (256 Mbit) Quad-SPI Flash memory
• 4 GTP (high-performance transceiver) lanes
  • GTP (high-performance transceiver) clock input
• 1 GByte (32-bit) DDR3 SDRAM
• 10/100 Mbit Ethernet PHY in RMII Mode
  • MAC address EEPROM
• Programmable Low Jitter PLL (Silicon Labs Si5338)
• On-board high-efficiency DC-DC converters
  • 12 A x 1.0V power rail
  • 1.5 A x 1.8V power rail
  • 1.5 A x 1.5V power rail
• Supply voltages: either 3.3V or 3.3V and 5V
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 128 FPGA I/O's (63 differential pairs) available on board-to-board connectors
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Two User configurable LEDs
• Evenly spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0712-02-42I36-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 35T
• 8 x screws
• 4 x bolts