TE0713-FPGA Module with Xilinx Artix-7 100T-2C, 1 GByte DDR3L, 4 x 5 cm

The Trenz Electronic TE0713-02-72C46-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 100T FPGA, USB 3.0 to FIFO bridge, 1 GByte DDR3L SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/O's are provided via rugged high-speed strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A100T-2FGG484C
• Rugged for high shock and high vibration resistance
• Industrial temperature range on request
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 1 GByte DDR3L 32-bit SDRAM
• 32 MByte QSPI Flash memory (with XiP support)
• USB 3.0 to FIFO interface bridge
• 152 FPGA I/O's (75 differential pairs) available via B2B connectors
• Programmable clock quad generator
  • GTP transceiver clock (default 125 MHz)
  • Fabric clock (default 200 MHz)
• External clock input for GTP transceivers via B2B connector
• 4 GTP (multi Gigabit transceiver) lanes
• On-board high-efficiency DC-DC converters
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• User configurable LED
• Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0713-02-72C46-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 100T
• 8 x screws
• 4 x bolts

TE0727 Xilinx Zynq-7000｜ZynqBerryZero Module with Xilinx Zynq-7010, 512 MB DDR3L SDRAM, 3 x 6.5 cm

The ZynqBerryZero is a SoC module with integrated Xilinx Zynq-7010 FPGA and the form factor of the Raspberry Pi Zero. Furthermore, the 3 x 6.5 cm small board is equipped with 512 MByte DDR3L SDRAM, 16 MByte Flash and various connectors, such as two microUSB connectors, a micro SD card slot, a mini HDMI and a CSI-2 connector (camera).

• Key Features

  • Xilinx Zynq XC7Z010-1CLG225C FPGA
  • Raspberry Pi Zero form factor
  • 512 MByte DDR3L SDRAM
  • 16 MByte Flash memory
  • 40 pin HAT header
  • Total I/O: 26 GPIO
  • 1 x micro USB for JTAG/UART
  • 1 x micro USB 2.0
  • Micro SD card slot
  • Mini HDMI connector, type C
  • CSI-2 connector (camera)

Scope of Delivery

• 1 x TE0727-02-41C34 "ZynqBerryZero" Trenz Electronic FPGA module with Xilinx Zynq-7010 FPGA

TE0714 Xilinx Artix-7：35T｜FPGA Module with Xilinx Artix-7 XC7A35T-2CSG325I, 3,3V Configuration, 4 x 3 cm 

The Trenz Electronic TE0714-03-35-2I is an industrial-grade FPGA module integrating a Xilinx Artix-7 35T, 16 MByte QSPI Flash memory for configuration and operation and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

Key Features

• Xilinx Artix-7 XC7A35T-2CSG325I
• Rugged for high shock and vibration
• Size: 3 x 4 cm
• 16 MByte QSPI Flash memory
• Differential MEMS oscillator for MGT clocking
• MEMS oscillator for PL clocks (optional)
• Plug-on module with 2 × 100-pin high-speed hermaphroditic strips
  
  • 138 FPGA I/O's (max 68 differential) +5 I/O's (QSPI or user I/O's)
  • XADC Analog Input
  • 4 GTP (high-performance transceiver) lanes
  • GT reference clock inputs
  • Optimized I/O and power pins for good signal integrity
• On-board high-efficiency DC-DC converters
• Power supply for all on-board components
• eFUSE bit-stream encryption (AES)
• One user configurable LED

Scope of Delivery

• 1 x  TE0714-03-35-2I Trenz Electronic FPGA module with Xilinx Artix-7 35T

TE0725 Series-Xilinx Artix-7, Flash, HyperRAM, 2 x 50-pin Headers, 2.54 mm Pitch(15T, 35T, 50T, 75T, 100T)

The Trenz Electronic TE0725 Series is a low cost small-sized FPGA module integrating a Xilinx Artix-7 15T/35T/50T/100T, 8 MByte HyperRAM and 32 MByte Flash memory for configuration and operation. The 2 x 50 pin header with a 2.54 mm standard pitch fits perfect on a perfboard.

• Key Features

  • Xilinx Artix-7 Series
  • Commercial temperature grade (industrial on request)
  • 3.5 x 7.3 cm form factor
  • 32 MByte Flash memory
  • 64 MBit (8 MByte) HyperRAM
  • 2 x 50 pin headers with 2.54 mm pitch, ideal for prefboard use
  • 87 I/O's (42 + 42 + 3)
  • 100 MHz system clock
  • I2C EEPROM
  • 3.3 V single supply with on-board voltage regulators
  • JTAG/UART connector
  • 2 LEDs
  • Optional POF Fiber Optical Adapter (125/250 MBit/s)

Scope of Delivery

• 1 x TE0725-03-15-1C Trenz Electronic FPGA module with Xilinx Artix-7 15T
• 3 x pin header, straight, double row, for J1 and J2 as well as JB1