TE0720－SoC Module with Xilinx Zynq 7020-1Q Automotive, 1 GByte DDR3, low profile

The Trenz Electronic TE0720-04-61Q33ML is an industrial-grade SoC module integrating a Xilinx Automotive Zynq-7020, a Gigabit Ethernet transceiver, 1 GByte DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Zynq XA7Z020-1CLG484Q (Automotive)
• Rugged for high shock and vibration
• ARM dual-core Cortex-A9 MPCore
• 10/100/1000 tri-speed Gigabit Ethernet transceiver (PHY), SGMII accessible on a board-to-board connector
• USB 2.0 high speed ULPI transceiver
• 1 GByte (32-bit) DDR3 SDRAM
• 32 MByte QSPI Flash memory (for configuration and operation)
• 8 GByte e.MMC (optional up to 32 GByte)
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (low profile 2.5 mm)
• 152 FPGA I/O's (75 LVDS pairs possible) and 14 MIO's available on board-to-board connectors
• On-board high-efficiency DC-DC converters
  • 4.0 A x 1.0V power rail
  • 3.0 A x 1.5V power rail
  • 3.0 A x 1.8V power rail
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Valid MAC Address and 2K serial EEPROM
• SHA-256 authentication chip with unique serial number
• RTC, temperature compensated
• 3 user LEDs
• Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0720-04-61Q33ML Trenz Electronic 4 x 5 cm SoC module with Xilinx Zynq-7020 (Automotive)

TE0712-FPGA Module with Xilinx Artix-7 XC7A100T-2C, 1 GByte DDR3, 4 x 5 cm, low profile

The Trenz Electronic TE0712-02-72C36-L is an industrial-grade FPGA module integrating a Xilinx Artix-7 100T FPGA, 1 GByte of DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, a 10/100 Mbit Ethernet transceiver, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A100T-2FGG484C
• Rugged for high shock resistance and high vibration
• 32 MByte (256 Mbit) Quad-SPI Flash memory
• 4 GTP (high-performance transceiver) lanes
  • GTP (high-performance transceiver) clock input
• 1 GByte (32-bit) DDR3 SDRAM
• 10/100 Mbit Ethernet PHY in RMII Mode
  • MAC address EEPROM
• Programmable Low Jitter PLL (Silicon Labs Si5338)
• On-board high-efficiency DC-DC converters
  • 12 A x 1.0V power rail
  • 1.5 A x 1.8V power rail
  • 1.5 A x 1.5V power rail
• Supply voltages: either 3.3V or 3.3V and 5V
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (low profile 2.5 mm)
• 158 FPGA I/O's (78 differential pairs) available on board-to-board connectors
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Two User configurable LEDs
• Evenly spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0712-02-72C36-L Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 100T, low profile
  - as shown, without spacer bolts and screws -

TE0711｜High IO Industrial-grade Xilinx Artix-7 35T Module with speedgrade 2I and USB

The Trenz Electronic TE0711-01-35-2I is an industrial-grade FPGA module integrating a Xilinx Artix-7 35T, 32 MByte Quad SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A35T-2CSG324I,
• Rugged for shock and high vibration
• 32 MByte QSPI Flash memory
• 100 MHz MEMS oscillator
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 178 FPGA I/O's (84 differential pairs) available on board-to-board connectors
• On-board high-efficiency DC-DC converters
  • 4.0 A x 1.0 V power rail
  • 1.0 A x 1.8 V power rail
  • 1.0 A x 1.5 V power rail
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Four LEDs (three  freely used by user design, one system controller CPLD status LED)
• FTDI FT2232H USB 2.0 High Speed to UART/FIFO
• Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0711-01-35-2I Trenz Electronic 4 x 5 cm  FPGA module with Xilinx Artix-7 35T
• 8 x screws
• 4 x bolts

TE0712-FPGA Module with Xilinx Artix-7 XC7A35T-2FGG484I, 1 GByte DDR3, 4 x 5 cm

The Trenz Electronic TE0712-02-42I36-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 35T FPGA, 1 GByte of DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, a 10/100 Mbit Ethernet transceiver, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A35T-2FGG484I
• Rugged for high shock resistance and high vibration
• 32 MByte (256 Mbit) Quad-SPI Flash memory
• 4 GTP (high-performance transceiver) lanes
  • GTP (high-performance transceiver) clock input
• 1 GByte (32-bit) DDR3 SDRAM
• 10/100 Mbit Ethernet PHY in RMII Mode
  • MAC address EEPROM
• Programmable Low Jitter PLL (Silicon Labs Si5338)
• On-board high-efficiency DC-DC converters
  • 12 A x 1.0V power rail
  • 1.5 A x 1.8V power rail
  • 1.5 A x 1.5V power rail
• Supply voltages: either 3.3V or 3.3V and 5V
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 128 FPGA I/O's (63 differential pairs) available on board-to-board connectors
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Two User configurable LEDs
• Evenly spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0712-02-42I36-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 35T
• 8 x screws
• 4 x bolts