∵ proFPGA產品線 ⑤：子板與延伸介面 - FPGA DSP SDR 軟硬體 │ DIGILENT 台灣唯一授權代理

: ∵ proFPGA產品線 ⑤：子板與延伸介面

介面板 │ USB 3.0 Interface Board

Product Summary

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA USB 3.0 Interface board. This daughter board occupies one extension site of the proFPGA system and provides two USB 3.0 A female connectors which can be used either in host or in device mode. The USB 3.0 connection is provided with the TUSB1310A from Texas Instruments. All IO and Clock IO pins of the extension board bottom connector are used. The MGT ports are not used. So it's preferred to put this board onto an FPGA connector without MGT ports or to put in onto an extension board with top connector which uses the MGT ports and only a short amount of IO pins.

proFPGA USB 3.0 Interface Board
proFPGA Connectors	1x proFPGA extension board connector (1 at bottom-side)
Interfaces	2 x USB 3.0 A female connectors Can be used either in host or in device mode
Others	proFPGA USB 3.0 Interface Board 2 x AK669/3-3-R cables for use in host mode 2 x AK670/3-2-R cables for use in device mode
Product article number	PROF044 EB-PDS-USB3-R1
Order Code	PROF-A-I-USB3

	產品文件：proFPGA 產品總覽 (EN)
	產品編號：PROF-A-I-USB3

: ∵ proFPGA產品線 ⑤：子板與延伸介面

介面板 │ Zynq US+ Interface Board

Product Summary

proFPGA Zynq US+ Interface Board
proFPGA Connectors	1x proFPGA extension board connector (1 at bottom-side)
Interfaces	1x CAN Interface 1x Display port interface 1x Gbit ethernet interface 1x GPIO interface 1x I²C interface 1x PMU access 1x SATA interface USB 3.0 interface
Product article number	PROF120 EB-FM-XCZUxxEG-R2
Order Code	PROF-A-I-XCZUxx

	產品文件：proFPGA 產品總覽 (EN)
	產品編號：PROF-A-I-XCZUxx

: ∵ proFPGA產品線 ⑤：子板與延伸介面

系統互連板 │ Interconnect Cable

Product Summary

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA Interconnect Cable. The proFPGA Interconnect Cable connects any 2 extension site connectors of the proFPGA system together. Over the length matched high-performance cables up to 147 I/0s can be connected with a maximum point to point performance depending on the used FPGA type. The board can be used with single ended and differential connections. It is available in 400 mm or 800 mm length.

proFPGA Interconnect Cable
IO	131
Clock IO	16
Performance	Maximum point to point performance depending on the used FPGA type
Others	Equipped with ID chip for automatic board recognition via proFPGA motherboard
Product article number	IC-PDS-CABLE-R1
Order code	PROF-A-IC-C-40 (400mm), PROF-A-IC-C-80 (800mm)

	產品文件：proFPGA 產品總覽 (EN)
	產品編號： PROF-A-IC-C-40 (400mm), PROF-A-IC-C-80 (800mm)

: ∵ proFPGA產品線 ⑤：子板與延伸介面

系統互連板 │ Breakout Interconnect Board

Product Summary

The proFPGA product family is a complete, scalable, and modular multi FPGA solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA Breakout Interconnect Board. The proFPGA Breakout board provides the ability to spread a single proFPGA-Connector up to three proFPGA-V1-Connectors.

proFPGA Breakout Interconnect Board
Connectors	one proFPGA Bottom Connector, three proFPGA-V1-Top Connectors (X1,X2,X3)
Supported proFPGA FPGA Modules	FM-XC7V2000T FM-XC7VX330T XC7VX690T-R3 FM-XC7Z100-R1 FM-XCVU440
Number of IOs	UThe proFPGA-V1-Top Connectors provides a different number of I/Os X1: 47 I/Os and 8 Clock-I/Os X2: 47 I/Os and 8 Clock-I/Os X3: 46 I/Os and 8 Clock-I/Os
Others	I²C subsystem including I²C IDPROM, I²C multiplexer and I²C GPIO expander
Product article number	PROF078 EB-PDS-BREAKOUT-R1
Order code	PROF-A-IC-BOB

	產品文件：proFPGA 產品總覽 (EN)
	產品編號：PROF-A-IC-BOB

: ∵ proFPGA產品線 ⑤：子板與延伸介面

系統互連板 │ Interconnect Cable (70pin)

Product Summary

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA Interconnect Cable. The proFPGA Interconnect Cable connects any 2 extension site connectors of the proFPGA system together. Over the length matched high-performance cables up to 52 I/0s can be connected with a maximum point to point performance depending on the used FPGA type. The board can be used with single ended and differential connections. It is available in 400 mm or 800 mm length.

proFPGA Interconnect Cable (70-Pin)
IO	up 52
Clock IO	8
Performance	Maximum point to point performance depending on the used FPGA type
Others	Equipped with ID chip for automatic board recognition via proFPGA motherboard
Product article number	IC-PDS-CABLE-R2/R3
Order code	PROF-A-IC-C-70P-40 (400mm), PROF-A-IC-C-70P-80 (800mm)

	產品文件：proFPGA 產品總覽 (EN)
	產品編號： PROF-A-IC-C-70P-40 (400mm), PROF-A-IC-C-70P-80 (800mm)

Page 6 of 10