Overview
R1028A mmWave front-end module is developed for 5G mmWave high data rate transmission on 28GHz. It not only supports scalable antenna element and high-speed beam switching but also can provide horizontal/vertical (H/V) different beam resolution simultaneously. R1028A is also a commercial product to let user conduct transmission in mmWave band, or further, integrate any baseband chip to develop into 5G mmWave commercial products like 5G NR mmWave CPE and 5G NR mmWave Radio Unit (RU).
Applications
- 5G NR communications
- Point-to-point communications
- Point-to-multipoint communication
Features
- Up/down-converter integrated
- 2D beamforming with FoV of 120°
- Dual polarization for two-layer transmission
- Scalable antenna modular according to applications
- Programmable beam pattern & adjustable beam width
Specifications
- Antenna type: 4x2 or 4x4
- H/V P1dB EIRP: 29/26.5dBm for 4x2, 35/32.5dBm for 4x4
- TX mode power @12V: 1.40A for 4x2, 1.70A for 4x4
- RX mode power @12V: 1.20A for 4x2, 1.45A for 4x4
- Phase/Attenuation bits: 5/5
- Beam switch duration: 140ns
- Operation band: 27.50~28.35GHz
- IF range: 2.5~4.0GHz
- H/V FoV: 120°
- Supported bandwidth: 800MHz
- Noise figure: 5dB
- Duplexing mode: TDD
- Size: 9.6x15x6cm
| 產品文件：產品規格表 | |
| 產品編號：R1028A |