TEB0707-Trenz Electronic 4 x 5 Module Carrier for CRUVI Extension Boards

The Trenz Electronic TEB0707 is a carrier board for 4 x 5 Trenz Electronic modules. It provides three high speed and one low speed CRUVI extension connectors.

The TEB0707 is integrated with an Intel MAX 10 FPGA as system controller and is equipped with a Micro USB2.0 socket with FTDI to JTAG/UART solution, RJ45 LAN socket, USB A socket, microSD card socket, user LEDs, push buttons and DIP switches for controlling the SoM.

Key Features

Modules

• 4 x 5 Trenz Electronic modules

RAM/Storage

• EEPROM (FTDI configuration)

On Board

• Intel MAX 10 FPGA
• FTDI FT2232
• 6 x user LEDs (3 x green, 3 x red)
• 2 x status LEDs
• DIP switch
• Push buttons

Interface

• Gigabit RJ45 LAN socket
• MicroSD card socket
• Micro USB2.0 socket
• USB A socket
• 3 x High Speed CRUVI B2B connectors
• 1 x Low Speed CRUVI B2B connector
• 4 x Jumpers

Power: 5V input power supply

Dimension: 135 x 68 mm

Scope of Delivery

• 1 x TEB0707-02 carrier board for Trenz Electronic 4 x 5 cm modules