Previous Next

TE0745|Xilinx Zynq-7000 Series|Heat Spreader

TE0745 Series-Xilinx Zynq-7000, DDR3L, Flash, USB, Ethernet, 8 x GTX,Heat Spreader(Z-7030, Z-7045)

The Trenz Electronic TE0745 Series are industrial-grade SoC modules integrating a Xilinx Zynq-7030/ Xilinx Zynq-7045, 1 GByte DDR3L SDRAM, 64 MByte QSPI Flash memory for configuration and operation and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

This module is identical with TE0745-02-71I31-A (replacement for TE0745-02-71I11-A) except the mounted heat spreader.

All this on a tiny footprint of 5.2 x 7.6 cm at the most competitive price. These high-density integrated modules are smaller than a credit card and available in several variants.

Key Features

  • Xilinx Zynq-7000 Series(Z-7030, Z-7045)
  • Rugged for high shock and vibration
  • Size 5.2 x 7.6 cm
  • Dual ARM Cortex-A9 MPCore
  • 1 GByte 32-Bit wide DDR3L
  • 64 MByte QSPI Flash memory
  • 1 GBit Ethernet PHY
  • USB 2.0 OTG PHY
  • Plug-on module with 3 x 160-pin High-Speed Samtec ST5 connectors
  • 250 FPGA I/O's and 6 MIO available on board-to-board connectors
  • 8 x GTX (7030: 4 x GT)
  • 2 GT Reference Clock inputs (7030: 1 REFCLK)
  • 2 x PLL outputs
  • Reference clock input for PLL (optional)
  • I2C
  • MAC Address EEPROM
  • RTC
  • Evenly-spread supply pins for good signal integrity

Scope of Delivery

  • 1 x TE0745-02-71I31-A Trenz Electronic SoM with Xilinx Zynq-7030
  • 1 x mounted heat spreader (article no. KK0745-02)

  產品編號:

TE0745-02-71I31-AK:Xilinx Zynq 7030-1I and Heat Spreader

TE0745-02-92I31-AK:Xilinx Zynq 7045-2I and Heat Spreader

TE0745-02-93E31-AK:Xilinx Zynq 7045-3E and Heat Spreader

  線上商店: 購買連結 可線上刷卡/享運費補助!