Previous Next

TE0715|Xilinx Zynq-7030-1I

TE0715-SoC Module with Xilinx Zynq 7030-1I, 1 GByte DDR3L, 4 x 5 cm, low profile

The Trenz Electronic TE0715-05-71I33-L are industrial-grade Xilinx Zynq-7030 System on Modules with 4 MGT Links, a Gigabit Ethernet transceiver (physical layer), 8 GBit (1 GByte) DDR3L SDRAM with 32-bit width, 32 MByte SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

  • Xilinx Zynq 7030 XC7Z030-1SBG485I
  • Rugged for shock and high vibration
  • ARM dual-core Cortex-A9 MPCore
  • 10/100/1000 tri-speed gigabit Ethernet transceiver (PHY) with SGMII
  • MAC Address EEPROM
  • USB 2.0 high-speed ULPI transceiver
  • 32-Bit-wide 1 GByte DDR3L SDRAM
  • 32 MByte QSPI Flash memory (with XiP support)
  • Programmable Clock Generator: Transceiver Clock (default 125 MHz)
  • Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (low profile 2.5 mm)
  • 132 FPGA I/O's (65 LVDS pairs possible) and 14 PS-MIO available on board-to-board connectors
  • 4 GTP/GTX Tranceivers
  • On-board high-efficiency DC-DC converters:
    • 4.0 A x 1.0V power rail
    • 3.0 A x 1.5V power rail
  • Temperature compensated RTC (real-time clock)
  • System management
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • User LED
  • Evenly-spread supply pins for good signal integrity

Scope of Delivery

  • 1 x TE0715-05-71I33-L Trenz Electronic 4 x 5 cm SoC module with Xilinx Zynq-7030, low profile
    - as shown, without spacer bolts and screws -

  產品編號:TE0715-05-71I33-L

  線上商店: 購買連結 可線上刷卡/享運費補助!