文章

TE0715－SoC Module with Xilinx Zynq Z-7012S single core, 1 GByte DDR3L SDRAM, 4 x 5 cm

The Trenz Electronic TE0715-05-21C33-A is a SoC module integrating a Xilinx Zynq Z-7012S with 4 MGT Links, a Gigabit Ethernet transceiver (physical layer), 1 GByte DDR3L SDRAM, 32 MByte SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

This device contains a single-core ARM Cortex-A9 processor and represents the lowest cost entry point to the scalable Zynq-7000 platform.

Key Features

• Xilinx Zynq XC7Z012S-1CLG485C
• Rugged for shock and high vibration
• Single-Core ARM Cortex-A9 MPCore up to 766MHz
• 10/100/1000 tri-speed gigabit Ethernet transceiver (PHY) with SGMII
• MAC Address EEPROM
• USB 2.0 high-speed ULPI transceiver
• 1 GByte (32-bit) DDR3L SDRAM
• 32 MByte QSPI Flash memory (with XiP support)
• Programmable Clock Generator: Transceiver Clock (default 125 MHz)
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 132 FPGA I/O's (65 LVDS pairs possible) and 14 PS-MIO available on board-to-board connectors
• 4 GTP/GTX Tranceivers
• On-board high-efficiency DC-DC converters
  • 4.0 A x 1.0V power rail
  • 3.0 A x 1.5V power rail
• Temperature compensated RTC (real-time clock)
• System management
• eFUSE bit-stream encryption
• AES bit-stream encryption
• User LED
• Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0715-05-21C33-A Trenz Electronic 4 x 5 cm SoC module with Xilinx Zynq Z-7012S (single core processor)
• 8 x screws
• 4 x bolts