Previous Next

TE0713|Xilinx Artix-7 (100T-2C/200T-2C)

TE0713-FPGA Module with Xilinx Artix-7 100T-2C, 1 GByte DDR3L, 4 x 5 cm

The Trenz Electronic TE0713-02-72C46-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 100T FPGA, USB 3.0 to FIFO bridge, 1 GByte DDR3L SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/O's are provided via rugged high-speed strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

  • Xilinx Artix-7 XC7A100T-2FGG484C
  • Rugged for high shock and high vibration resistance
  • Industrial temperature range on request
  • Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
  • 1 GByte DDR3L 32-bit SDRAM
  • 32 MByte QSPI Flash memory (with XiP support)
  • USB 3.0 to FIFO interface bridge
  • 152 FPGA I/O's (75 differential pairs) available via B2B connectors
  • Programmable clock quad generator
    • GTP transceiver clock (default 125 MHz)
    • Fabric clock (default 200 MHz)
  • External clock input for GTP transceivers via B2B connector
  • 4 GTP (multi Gigabit transceiver) lanes
  • On-board high-efficiency DC-DC converters
  • System management and power sequencing
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • User configurable LED
  • Evenly-spread supply pins for good signal integrity

Scope of Delivery

  • 1 x TE0713-02-72C46-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 100T
  • 8 x screws
  • 4 x bolts

  產品編號:

TE0713-02-72C46-A:Xilinx Artix-7 100T-2C

TE0713-02-82C46-A:Xilinx Artix-7 200T-2C

  線上商店: 購買連結 可線上刷卡/享運費補助!