TE0711｜High IO Industrial-grade Xilinx Artix-7 35T Module with speedgrade 2I and USB

The Trenz Electronic TE0711-01-35-2I is an industrial-grade FPGA module integrating a Xilinx Artix-7 35T, 32 MByte Quad SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A35T-2CSG324I,
• Rugged for shock and high vibration
• 32 MByte QSPI Flash memory
• 100 MHz MEMS oscillator
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 178 FPGA I/O's (84 differential pairs) available on board-to-board connectors
• On-board high-efficiency DC-DC converters
  • 4.0 A x 1.0 V power rail
  • 1.0 A x 1.8 V power rail
  • 1.0 A x 1.5 V power rail
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Four LEDs (three  freely used by user design, one system controller CPLD status LED)
• FTDI FT2232H USB 2.0 High Speed to UART/FIFO
• Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0711-01-35-2I Trenz Electronic 4 x 5 cm  FPGA module with Xilinx Artix-7 35T
• 8 x screws
• 4 x bolts