∵ proFPGA產品線 ⑤：子板與延伸介面

The proFPGA product family is a complete, scalable, and modular multi FPGA solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA DDR3 SDRAM board. This daughter board occupies one extension site of the proFPGA system and offers up to 2GB DDR3 SDRAM memory and can be accessed over a 64bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 1600 Mbps. Besides the board offers 16 on board LEDs, which can we used for debugging purpose.

The proFPGA product family is a complete, scalable, and modular multi FPGA solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA Flash board. This daughter board occupies one extension site of the proFPGA system and offers 128 Gbit ONFI flash, 512 Mbit quad SPI flash, 1 Mbit NVSRAM, 1 Mbit quad SPI MRAM, Debug interface for ONFI flash with 38-pin MICTOR connector, debug interface for all SPI signals of all SPI devices, 2 x I²C 64 kbit EEPROMs, 1 x debug interface for each I²C EEPROM, I²C EEPROM address selection via DIP switch, 1 x A15 Dstream connector, 1 x PMBus header, 3 x UART headers, 1 x heartbeat LED, 3 x debug LEDs, 1 x push button, debug header with 4 IO signals connected with pull-ups and the possibility to assemble jumpers to set a low input signal and a debug header with 8 IO signals connected with pull-ups, the possibility to assemble pull-downs and the possibility to assemble jumpers to set a low input signal. Additionally green LEDs are connected to each GPIO line.

The proFPGA product family is a complete, scalable, and modular multi FPGA solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA SRAM board. This daughter board occupies one extension site of the proFPGA system and offers up to 144 Mbit memory depth per SRAM accessed over a 18 bit databus. The proFPGA SRAM Board is available in two different configurations. EB-PDS-SRAM-R1: 3x CY7C1618KV18-250BZXC (500MBit/s), EB-PDS-SRAM-R2:  3x CY7C1618KV18-333BZXC (666MBit/s). Depending on the used SRAM type you can run with 250 MHz or 333 MHz. Further the board offers 5 LEDs for debugging.

The proFPGA product family is a complete, scalable, and modular multi FPGA solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA LPDDR2 board. This daughter board occupies one extension site of the proFPGA system and offers 2x two GBit Winbond W97BH2KBQX memory devices which can be accessed over a 32bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 800 Mbps. Besides the board offers three push-buttons, 16 on board LEDs and 2 SoftTouch connectors, which can we used for debugging purpose.