Previous Next

Zynq 7000系列 │ XC7Z100

Product Summary

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Part of this modular and flexible system concept is the proFPGA Zynq™ 7000 FPGA module, which can be easily mounted on the proFPGA uno, duo or quad motherboard and mixed together with various other proFPGA FPGA modules like the proFPGA Virtex 7 2000T FPGA module. The proFPGA Zynq™ 7000 FPGA module addresses customers who require a complete embedded processing platform for high performance SoC Prototyping solution, IP verification and early software development.

Equipped with a Xilinx Zynq™ XC7Z100 FPGA which combines a user FPGA with an ARM Core Processor (Dual ARM® Cortex™-A9 MPCore™ with CoreSight™) and several on board interfaces like USB 2.0 OTG, Gigabit Ethernet or ARM JTAG debug interface the Board offers a complete embedded processing platform. Further the board already offers 1 GB on board DDR3 and dual quad SPI flash memory.

The FPGA module offers a total of 2 extension sites on the top with 260 standard I/Os and 16 high speed serial transceivers for extending the board with standard proFPGA or user specific extension boards.



proFPGA Xilinx Zynq 7000 XC7Z100 FPGA Module Specification
FPGA Type Xilinx Zynq XC7Z100 (speedgrade 1,2 )
Capacity 2.7 M ASIC gates
Embedded Processor Core

Dual ARM® Cortex™-A9 MPCore™ with CoreSight™

On Board Interfaces Processor Unit
  • USB UART interface for debugging
  • USB 2.0 OTG
  • Gigabit Ethernet 
  • ARM JTAG Connector for debugging
  • PL (Programmable Logic) 
  • PS (Processing System) 
  • System reset buttons
On Board Memories Processor Unit
  • 1 GB DDR3 memory
  • Dual Quad SPI Flash Memory
Signaling rate Up to 1.2 Gbps (standard I/O)/ 12.5 Gbps (MGT)
Extension sites

2 extension sites with high performance connectors

I/O resources
  • 260 per FPGA module
  • 1 x 148 I/Os to top side connector A1
  • 1 x 98 I/Os to top side connector A2
  • Single-ended or differential
High Speed I/O transceivers
  • 16 per FPGA module
  • 1 x 8 MGTs (up to 12.5 Gb/s) to top side connector A1
  • 1 x 8 MGTs (up to 12.5 Gb/s) to top side connector A2
Available interface boards

USB 3.0, PCIe Gen2/Gen3, MIPI, DVI, DDR3 memory, Gb Ethernet, etc.

Voltage regions
  • 2 individually adjustable voltage regions per FPGA Module
  • Stepless from 1.2V up 3.3V for HR IOs and 1.2. to 1.8 for HP IOs
On Board Clocking
  • 1 x 33.333 MHz clock is generated for the ARM Core as system clock
  • 1 x 50 MHz are provided to the FPGA PL
Clocking over proFPGA duo/quad Motherboard
  • 8 global clock and sync signal inputs per motherboard
  • X fully synchronous derived clocks with sync signals
System Requirements Works only with proFPGA uno, duo or quad motherboard
  • JTAG interface
  • On Board SD memory card
Power External (optional) ATX Power Supply (12 V, 24 - 35 A output) 
  • 5.91" x 0.95" x 5.91" / 150 mm x 24 mm x 150 mm (width x height x depth)
  • 0.25 kg weight
Product article number PROF061 FM-XC7Z100-R4
Order code PROF-FM-XC7Z100

011 yes 128   產品文件:產品型錄
20171115 04   產品編號:PROF-FM-XC7Z100


T │ 886-3-5790380

F │ 886-3-5790370

E │

A │ 新竹市關新路27號18樓之2




本網站所列之產品資訊僅供參考,實際產品數據以原廠所提供之資訊為主 / 網站使用條款及連結政策

©2012-2019 Haley Technology Corporation. All rights reserved.