TE0783－High-Performance SoM with Xilinx Zynq Z-7045, Memory on both PS+PL, 8.5 x 8.5

The Trenz Electronic TE0783 is a high-performance, industrial-grade SoM (System on Module) based on Xilinx Zynq-7000 SoC (XC7Z045) with 1 GByte (32-bit) DDR3 RAM connected to PS, 2 GByte (64-bit) DDR3 RAM connected to PL, 4 GByte e.MMC, 16 GTX high-performance transceiver lanes, 32 MByte QSPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. 

Features

• Xilinx Zynq-7000 XC7Z045-2FFG900I SoC
• Rugged for shock and high vibration
• Large number of configurable I/Os are provided via rugged high-speed stacking strips
• Dual ARM Cortex-A9 MPCore
  • 1 GByte (32-bit) DDR3 RAM connected to PS
  • 2 GByte (64-bit) DDR3 RAM connected to PL
  • 32 MByte QSPI Flash memory
  • Hi-Speed USB 2.0 ULPI transceiver PHY
  • Gigabit (10/100/1000 Mbps) Ethernet transceiver PHY
  • 4 GByte e.MMC (optional up to 64 GByte)
• Lattice MachXO2 HC 4000 System Controller CPLD
  • 40 GPIO's available to user on B2B connector
• MAC-address EEPROM
• Serial user EEPROM
• Temperature compensated RTC (real-time clock)
• Si5338A programmable quad PLL clock generator for GTX transceiver clocks
• Plug-on module with 3 x 160-pin high-speed strips
  • 16 GTX high-performance transceiver
  • 4 x GT transceiver clock inputs
  • 166 FPGA I/O's (83 LVDS pairs)
• On-board high-efficiency switch-mode DC-DC converters
• System management
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Evenly-spread supply pins for good signal integrity
• User LED

Scope of Delivery

• 1 x TE0783-02-92I33MA Trenz Electronic SoM with Xilinx Zynq-7045 FPGA