TE0729－SoC Module with Xilinx Zynq-7020, 512 MByte DDR3L SDRAM, 3 x Ethernet

The Trenz Electronic TE0729 is an industrial-grade SoC module integrating a Xilinx Zynq-7020 with a Gigabit Ethernet transceiver, 2 x 100 Mbit Ethernet, 512 MByte DDR3L SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint of 5.2 x 7.6 cm at the most competitive price. These high-density integrated modules are smaller than a credit card and available in several variants.

Key Features

• Zynq XC7Z020-2CLG484I
• Rugged for shock and high vibration
• Equipped with sulfur resistant resistors
• Evenly-spread supply pins for good signal integrity
• 3 mm mounting holes for Skyline heat spreader
• 2 x ARM Cortex-A9
• 1 x 10/100/1000 Mbps Ethernet transceiver PHY
• 2 x 10/100 Mbps Ethernet transceiver PHYs
• 3 x MAC-Address EEPROMs
• 512 MByte (16-bit) DDR3 SDRAM
• 32 MByte QSPI-Flash memory
• 8 GByte e.MMC memory
• USB 2.0 high-speed ULPI transceiver
• Plug-on module with 2 x 120-pin high-speed hermaphroditic strips
• 136 FPGA I/O's (58 LVDS pairs possible) and 6 PS MIO's available on board-to-board connectors
• On-board high-efficiency DC-DC converters
  • 4.0 A x 1.0V power rail
  • 1.5 A x 1.5V power rail
  • 1.5 A x 1.8V power rail
  • 1.5 A x 2.5V power rail
• System management
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Temperature compensated RTC (real-time clock)
• User LED
• size: 5.2 x 7.6 cm
• Cooling Solution available

Scope of Delivery

• 1 x TE0729-02-62I63MA Trenz Electronic SoC module with Xilinx Zynq-7020