TE0841 Series－Xilinx Kintex UltraScale, DDR4, Flash, 8 x GTH Transceiver(KU035, KU040)

The Trenz Electronic TE0841 Series is a FPGA module integrating a Xilinx Kintex UltraScale KU035 / KU040, 2 GByte DDR4 SDRAM, 64 MByte QSPI Flash for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Kintex UltraScale Series
• Rugged for industrial application
• Size: 40 x 50 mm
• 3 mm mounting holes for skyline heat spreader
• 2 banks of 1024 MByte DDR4 SDRAM, 32bit wide memory interface (each DDR 16bit separate)
• 64 MByte (512 MBit) SPI Boot-Flash
• B2B Connectors: 3 x Razor Beam High-Speed Hermaphroditic Terminal/Socket Strips (regular 4 mm), total 260 terminals
  • 60 x HR I/Os
  • 84 x HP I/Os
  • Serial transceiver: GTH 8 lanes (TX/RX)
  • 2 x MGT external clock inputs
• Clocking
  
  • Si5338 - 4 output PLL, GT and PL clocks
  • 200 MHz LVDS oscillator
• Power
  • All power supplies on board, single supply operation supported.
  • User defined IO-Bank power
• Evenly spread supply pins for good signal integrity.

Scope of Delivery

• 1 x TE0841-02-31C21-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Kintex UltraScale XCKU035 (commercial temperature range)
• 8 x screws
• 4 x bolts