TE0712-FPGA Module with Xilinx Artix-7 XC7A200T-2FBG484I, 1 GByte DDR3, 4 x 5 cm

The Trenz Electronic TE0712-03-82I36-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 200T FPGA, 1 GByte of DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, a 10/100 Mbit Ethernet transceiver, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A200T-2FBG484I
• Rugged for high shock resistance and high vibration
• 32 MByte (256 Mbit) Quad-SPI Flash memory
• 4 GTP (high-performance transceiver) lanes
  • GTP (high-performance transceiver) clock input
• 1 GByte (32-bit) DDR3 SDRAM
• 10/100 Mbit Ethernet PHY in RMII Mode
  • MAC address EEPROM
• Programmable Low Jitter PLL (Silicon Labs Si5338)
• On-board high-efficiency DC-DC converters
  • 12 A x 1.0V power rail
  • 1.5 A x 1.8V power rail
  • 1.5 A x 1.5V power rail
• Supply voltages: either 3.3V or 3.3V and 5V
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 158 FPGA I/O's (78 differential pairs) available on board-to-board connectors
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Two User configurable LEDs
• Evenly spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0712-02-82I36-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 200T
• 8 x screws
• 4 x bolts