∵ proFPGA產品線 ⑤：子板與延伸介面

The proFPGA product family is a modular multi FPGA Prototyping solution. Part of this modular and flexible system concept is the proFPGA DVI Interface board. This daughter board occupies one extension site of the proFPGA system and provides 1 x DVI Transmitter (TI TFP410) and 1 x DVI Receiver (TI TFP403) and runs with up to 165 MHz pixel rates (including 1080p and WUXGA @ 60 Mhz. Further with DVI on board, it provides 8 x general purpose LEDs and one Mictor-38 debug connector.

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA PCIe gen2 4-lane Kit. The proFPGA PCIe Kit provides up to two 4 lane gen2 PCIe communication interfaces between PC and FPGA Module to implement two PCIe downstream systems at the proFPGA system. All unused FPGA Module pins are routed to top side connector and are available for user applications.

The kit consists of a proFPGA PCIe gen2 dual 4-lane daughter card, which will be plugged on a free extension site of the proFPGA FPGA Module, which provides the required high speed serial transceivers (MGTs), 1x PCIe gen2 4-lane host interface card and a dedicated high performance cable. The kit reaches a data rate exchange of up to 5 Gbps per lane, which allows to run the PCIe gen2 interface in real time speed.

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA SATA Interface board. This daughter board occupies one extension site of the proFPGA system and provides 8 channels with run up to 12.5 Gbps on 8 SATA connectors (4xHOST, 4x DEVICE) which supports SATA Host and Device connections . The board offers Pericom PI3EQX1204 SATA redrivers to enable flexible high speed connection using SATA cables up to at least 1 m. Further it has a 4 outputs programmable reference clock generator, 2 MMCX connector pairs for clock output, 4 MMCX connector pairs for clock input, 4 on-board multiplexers to select between local and remote clock and 1 x proFPGA top connector to make unused FPGA signals available.

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Because of its modular and scalable system architecture, the user has maximum flexibility and reusability.

Part of this modular and flexible system concept is the proFPGA PCIe gen3 Root Complex Board. The Board has a PCIe x16 socket where 8 MGT lanes are connected and an M.2 socket with Key M where 4 MGT lanes are connected. In addition to this it offers a 12V power connector if the PCIe card draws too much current, 3 LEDs and one push button for user usage. 

The proFPGA PCIe gen3 Root Complex Board will be plugged on an extension site of the proFPGA FPGA Module and offers a proFPGA top connector to make unused FPGA signals available.