TE0741 Series-Xilinx Kintex-7, Flash, 8 High Speed Serial Transceivers, 25 MHz Oscillator（70T/160T/325T/410T ）

The Trenz Electronic TE0741 Series is a FPGA module integrating a Xilinx Kintex-7T FPGA, 8 MGTs (Multi Gigabit Transceivers) and 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Kintex-7（70T/160T/325T/410T ）
• 256 MBit (32 MByte) Quad-SPI Flash memory (for configuration and operation) accessible through:
  • FPGA
  • JTAG port (SPI indirect)
• 8 MGTs (multi gigabit transceivers)
• FPGA configuration through:
  • JTAG (B2B connector)
  • SPI Flash memory
• 25 MHz low jitter oscillator with shutdown control
• Programmable quad clock generator (Silicon Labs Si5338)
• On-board high-efficiency DC-DC converters
  • MGT voltage regulators with control enable
  • Core voltage regulators: up to 30 A (variants depend)
  • Supply voltages: either 3.3 V or 3.3 V and 5 V
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• Up to 144 (94 for 70T) single-ended FPGA I/O pins available on B2B strips
• 2 user LEDs, 1 DONE FPGA pin LED
• AES bit-stream encryption
• Evenly spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0741-04-A2C-1-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Kintex-7 70T
• 8 x screws
• 4 x bolts