TE0713-FPGA Module with Xilinx Artix-7 100T-2C, 1 GByte DDR3L, 4 x 5 cm

The Trenz Electronic TE0713-02-72C46-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 100T FPGA, USB 3.0 to FIFO bridge, 1 GByte DDR3L SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/O's are provided via rugged high-speed strips.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• Xilinx Artix-7 XC7A100T-2FGG484C
• Rugged for high shock and high vibration resistance
• Industrial temperature range on request
• Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
• 1 GByte DDR3L 32-bit SDRAM
• 32 MByte QSPI Flash memory (with XiP support)
• USB 3.0 to FIFO interface bridge
• 152 FPGA I/O's (75 differential pairs) available via B2B connectors
• Programmable clock quad generator
  • GTP transceiver clock (default 125 MHz)
  • Fabric clock (default 200 MHz)
• External clock input for GTP transceivers via B2B connector
• 4 GTP (multi Gigabit transceiver) lanes
• On-board high-efficiency DC-DC converters
• System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• User configurable LED
• Evenly-spread supply pins for good signal integrity

Scope of Delivery

• 1 x TE0713-02-72C46-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 100T
• 8 x screws
• 4 x bolts