: Products with Xilinx FPGA

TE0807｜UltraSoM+ Series

TE0807 "UltraSoM+" Series-Xilinx Zynq UltraScale+, DDR4, Flash, 20 High Speed Serial Transceivers（ZU4CG - ZU7CG, ZU4EG - ZU7EG, ZU4EV - ZU7EV）

The Trenz Electronic TE0807 "UltraSoM+" Series is a powerful MPSoC module integrating a Xilinx Zynq UltraScale+ ZU4CG - ZU7CG, ZU4EG - ZU7EG, ZU4EV - ZU7EV， 4 GByte DDR4 SDRAM, 128 MByte Flash memory for configuration and operation, 20 x high speed serial transceivers, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking connections.

All this on a tiny footprint of 5.2 x 7.6 cm at the most competitive price. These high-density integrated modules are smaller than a credit card and available in several variants.

Key Features

Xilinx Zynq UltraScale+ Series
ZU7EV 900 Pin Packages
3 mm mounting holes for skyline heat spreader
Size: 52 x 76 mm
B2B Connectors: 4 x 160 pin
Rugged for shock and high vibration
4 GByte DDR4 SDRAM
128 MByte SPI Boot Flash (dual parallel)
User I/Os
- 65 x PS MIOs, 48 x PL HD GPIOs, 156 x PL HP GIPIOs (3 banks)
- Serial transceivers: 4 x PS-GTR, 16 x PL-GTH
- Transceiver clocks inputs and outputs
- PLL clock generator inputs and outputs
Graphic Processing Unit (GPU) + Video codec unit (VCU)
Si5345 - 10 output PLL
All power supplies on board, single 3.3V Power required
- 14 on-board DC/DC regulators and 13 LDOs
- LP, FP, PL separately controlled power domains
Support for all boot modes (except NAND)
Support for any combination of PS connected peripherals
Evenly spread supply pins for good signal integrity

Scope of Delivery

1 x TE0807-03-7DI21-A Trenz Electronic MPSoC Module with Xilinx Zynq UltraScale+ ZU07EV

產品編號：

TE0807-03-7DI21-A：Xilinx Zynq UltraScale+ ZU7EV-1I

TE0807-03-7AI21-A：Xilinx Zynq UltraScale+ ZU7CG-1I

TE0807-03-7DE21-A：Xilinx Zynq UltraScale+ ZU7EV-1E

TE0807-03-4AI21-A：Xilinx Zynq UltraScale+ ZU4CG-1I

TE0807-03-4BE21-A：Xilinx Zynq UltraScale+ ZU4EG-1E

TE0807-03-4BE81-A：Xilinx Zynq UltraScale+ ZU4EG-1E

TE0807-03-7DI21-AZ：AMD Zynq™ UltraScale+™ ZU7EV-1I

TE0807-03-7DE21-AZ：AMD Zynq™ UltraScale+™ ZU7EV-1E

線上商店：購買連結 可線上刷卡/享運費補助！

: Products with Xilinx FPGA

TE0808 ｜UltraSoM+ Series

TE0808 "UltraSoM+" Series-Xilinx Zynq UltraScale+, DDR4, Flash, 20 High Speed Serial Transceivers(ZU6CG, ZU9CG, ZU6EG, ZU9EG, ZU15EG)

The Trenz Electronic TE0808 "UltraSoM+" Seriesis a MPSoC module integrating a Xilinx Zynq UltraScale+ ZU6CG, ZU9CG, ZU6EG, ZU9EG, ZU15EG, 4 GByte DDR4 SDRAM and 128 MByte Flash memory for configuration and operation, 20 x serial high speed transceivers, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking connections.

All this on a tiny footprint of 5.2 x 7.6 cm at the most competitive price. These high-density integrated modules are smaller than a credit card and available in several variants.

Key Features

Xilinx Zynq UltraSoM+ Series
ZU9EG 900 Pin Packages
3 mm mounting holes for skyline heat spreader
Size: 52 x 76 mm
B2B Connectors: 4 x 160 pin
Rugged for shock and high vibration
4 GByte DDR4 SDRAM, 64-Bit width
128 MByte SPI Boot Flash (dual parallel)
User I/Os
- 65 x PS MIOs, 48 x PL HD GPIOs, 156 x PL HP GIPIOs (3 banks)
- Serial transceivers: 4 x PS-GTR, 16 x PL-GTH
- Transceiver clocks inputs and outputs
- PLL clock generator inputs and outputs
Si5345 - 10 output PLL
All power supplies on board, single 3.3V Power required
- 14 on-board DC/DC regulators and 13 LDOs
- LP, FP, PL separately controlled power domains
Support for all boot modes (except NAND) and scenarios
Support for any combination of PS connected peripherals
Evenly spread supply pins for good signal integrity

Scope of Delivery

1 x TE0808-05-9BE21-L Trenz Electronic MPSoC module with Xilinx Zynq UltraScale+ ZU9EG, low profile

產品編號：

TE0808-05-9BE21-L：Zynq UltraScale+ XCZU9EG-1FFVC900E, 4 GB DDR4, LP

TE0808-05-9BE21-LZ：Zynq UltraSOM+ MPSoC Module with AMD Zynq™ UltraScale+™ ZU9EG-1E, 4 GB DDR4, LP

TE0808-05-6BE21-L：Zynq UltraScale+ XCZU6EG-1FFVC900E, 4 GB DDR4, LP

TE0808-05-6BE21-A：Zynq UltraScale+ XCZU6EG-1FFVC900E, 4 GB DDR4

TE0808-05-9BE21-A：Zynq UltraScale+ XCZU9EG-1FFVC900E, 4 GByte DDR4

TE0808-05-9GI21-A：Zynq UltraScale+ XCZU9EG-2FFVC900I, 4 GB DDR4

TE0808-05-BBE21-A：Zynq UltraScale+ XCZU15EG-1FFVC900E, 4 GB DDR4

TE0808-05-BBE21-AZ：AMD Zynq™ UltraScale+™ ZU15EG-1E, 4 GB DDR4

線上商店：購買連結 可線上刷卡/享運費補助！

: Products with Xilinx FPGA

TE0726 ZynqBerry｜Xilinx Zynq-7010

TE0726-"ZynqBerry" SoC Module with Xilinx Zynq-7010. Raspberry Pi 2 compatible

The Trenz Electronic TE0726-03-41C64-A is a Raspberry Pi 2 compatible SoC module integrating a Xilinx Zynq-7010 SoC, 512 MByte DDR3L SDRAM, four USB ports, an Ethernet port and 16 MByte Flash memory for configuration und operation. A microSD connector provides additional data storage.

This device contains a single-core ARM Cortex-A9 processor and represents the lowest cost entry point to the scalable Zynq-7000 platform.

Features

Xilinx Zynq XC7Z010-1CLG225C
- 512 MByte DDR3L SDRAM
- 16 MByte Flash
Raspberry Pi Model 2 form factor
LAN9514 USB Hub with Ethernet
- 4 x USB with power switches
- 100 Mbit Ethernet RJ45
Micro SD card slot
HAT header with 26 I/O's
HDMI type A
DSI connector (HDMI)
CSI-2 connector (camera)
Micro USB
- Power input
- USB UART
- JTAG ARM and FPGA debug
3.5 mm audio plug (PWM Audio output only)
Size: 6.35 x 9.3 cm

Scope of Delivery

1 x TE0726-03-41C64-A Trenz Electronic "ZynqBerry" module with Xilinx Zynq-7010

	產品編號：TE0726-03-41C64-A
	線上商店：購買連結可線上刷卡/享運費補助！

: Products with Xilinx FPGA

TEC0089｜DesignWare ARC EM Software Development Platform

TEC0089-DesignWare ARC EM Software Development Platform

The DesignWare® ARC® EM Software Development Platform is a flexible platform for rapid software development on ARC EM processors and subsystems. It is intended to accelerate software development and debug of ARC EM processor-based systems for a wide range of ultra-low power embedded applications such as IoT, sensor fusion, and voice applications. It includes an FPGA-based hardware board with commonly used peripherals and interfaces for extensibility. Downloadable platform packages containing different hardware configurations enable the board to be programmed with different ARC EM processors and subsystems. The packages also contain the necessary software configuration information for the toolchain and embARC Open Software Platform.

The development platform is supported by Synopsys' MetaWare Development Tool Kit, which includes a compiler, debugger and libraries optimized for maximum performance with minimal code size. The embARC Open Software Platform (OSP), available online from embarc.org, gives developers online access to device drivers, FreeRTOS, middleware and examples that enables them to quickly start software development for their ARC-based embedded systems.

Each hardware configuration includes an ARC EM processor and subsystem with access to 16MB of PSRAM, 16MB of SPI Flash and a wide range of peripherals such Audio Line In/Out, UART, SPI, I2C, and ADC. A 9-D motion sensor enables fast development of IoT applications. Two digital MEMs microphones can also be used for the development of voice applications. The hardware is extensible using the popular Arduino® interface and extension is also possible with Digilent® Pmod™ Interfaces, mikroBUS™ headers and a 50-pin header. Debug and trace are handled with USB/JTAG interfaces and a NEXUS interface for ARC Real-Time Trace (RTT). The board includes a micro-SD card slot for loading application software.

Key Features

Xilinx Kintex-7 XC7K325T-2FBG676C
32 MByte Quad-SPI Flash memory (for configuration and operation)
USB-JTAG bridge FT2232H
FPGA configuration through:
- JTAG
- SPI Flash memory
SPI Flash configuration through:
- JTAG
- USB
Connectors
- Arduino compatible pin headers
- MicroBUS compatible pin headers
- 3x Pmod compatible pin headers
- 50 pin header 2.54mm (40 single-ended IO, 20 differential lanes, variable VCCIO)
- Mictor Debug connector
- 10 pin Debug connector 2mm
2 x 8 MByte PSRAM IS66WVC4M16EALL
32 MByte User Quad-SPI Flash memory
Micro SDcard Socket
3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer ICM-20948
Stereo Audio Codec MAX9880A
2 x PDM Microphones SPK0641HT4H-1
2 x 3.5mm RCA audio jacks (input/output)
100MHz User Clock Oscillator SiT8008
Status LEDs, Power LED
- 8 x User LEDs
- Reset Buttons
- User Button
- 2 x 4bit User DIP switches
12V Power Supply (separately included in the scope of delivery)

Scope of Delivery

The ARC EM Software Development hardware consists of:

1 x ARC EM SDP (hardware) board
1 x 12V Interchangeable Plug with four adapters and cable
4 x bolts and screws

	產品編號：TEC0089-02-D2C-1-D
	線上商店：購買連結可線上刷卡/享運費補助！

: Products with Xilinx FPGA

TE0726 ZynqBerry｜Xilinx Z-7007S Single-Core

TE0726-"ZynqBerry" Module with Xilinx Z-7007S Single-Core, Raspberry Pi 2 compatible

The Trenz Electronic TE0726-03-11C64-A is a Raspberry Pi 2 compatible FPGA module integrating a Xilinx Zynq-7007S SoC, 512 MByte DDR3L SDRAM, four USB ports, an Ethernet port and 16 MByte Flash memory for configuration und operation. A microSD connector provides additional data storage.

This device contains a single-core ARM Cortex-A9 processor and represents the lowest cost entry point to the scalable Zynq-7000 platform.

Features

Xilinx Zynq XC7Z007S-1CLG225C
- 512 MByte DDR3L SDRAM
- 16 MByte Flash
- Single-Core ARM Cortex-A9 MPCore up to 766MHz
Raspberry Pi Model 2 form factor
LAN9514 USB Hub with Ethernet
- 4 x USB with power switches
- 100 Mbit Ethernet RJ45
Micro SD card slot
HAT header with 26 I/O's
HDMI type A
DSI connector (HDMI)
CSI-2 connector (camera)
Micro USB
- Power input
- USB UART
- JTAG ARM and FPGA debug
3.5 mm audio plug (PWM Audio output only)
Size: 6.35 x 9.3 cm

Scope of Delivery

1 x TE0726-03-11C64-A Trenz Electronic "ZynqBerry" module with Xilinx single-core Zynq Z-7007S

	產品編號：TE0726-03-11C64-A
	線上商店：購買連結可線上刷卡/享運費補助！

Products with Xilinx FPGA